Product Manual

19
Figure 8-2
4. Check alignment and securely tighten all hardware.
5. Verify that you have tightened wheel lug nuts to 85-90 lb/ft of torque.
STEP 9
1. Install left and right tail light brackets (26) with M10 x 20 bolts (D) and M10 nylon lock nuts (G).
2. Install license plate bracket (27) and left tail light (with clear lens on bottom) on left side bracket. See figure
9-1.
3. Install right side tail light.
Figure 9-1
4. Insert light wire through small hole in frame rail and install side marker lights (24) to front corner of frame
rails with M4 self tapping screws. There is one light on each side of the trailer. See figure 9-2.