Product Manual

13
STEP 5
Note: the right side fender is shown in figure 5-1.
1. Connect fender bracket (23) to spring hanger with M10 x 20 bolts (D) and M10 nylon lock nuts (G).
2. Connect fender (22) to fender bracket (23) with M10 x 20 bolts (D) and M10 nylon lock nuts (G). Note that
the holes on the side of the fender edge are toward the trailer.
Figure 5-1
3. Install left side fender using steps 1-2 above.
4. Place spring (15) into spring hanger with the closed end of spring toward the tow bar end of the trailer.
5. Install M14 x 80 bolts (A), M14 hex nuts (F) and 3mm cotter pins (K). Split cotter pins (K) as shown. See
figure 5-2.
Figure 5-2
6. Place axle (16) onto springs (15) with hole in axle over pegs on springs.