Product Manual

10
2. Position left rotation bracket (11L) as shown and connect front cross member (2) to left frame rail (1RL)
with M10 x 20 bolt (D), M10 x 30 bolt (C) and M10 nylon lock nuts (G). See figure 3-2.
Figure 3-2
3. Position stake pocket (25) and connect the center cross member (2) to left frame rail (1RL) with M10 x 20
bolt (D), M10 x 30 bolt (C) and M10 nylon lock nuts (G). The center cross member (2) goes in the forward
of the three holes on left frame rail. See figure 3-3.
Figure 3-3
4. Verify that the rear cross member (2) is positioned with the opening the channel facing the front of the
trailer. See figure 3-4. Note: If trailer is equipped with a tailgate, cross member must be installed with
tailgate brackets on the top. See figure 11-2.
5. Connect rear cross member (2) to left frame rail (1RL) with M10 x 20 bolts (D) and M10 nylon lock nuts (G).
See figure 3-4.