Product Manual

2
Thank you very much for choosing a Ironton product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This battery tester is designed for certain applications only. The distributor cannot be
responsible for issues arising from modification. We strongly recommend this machine not
be modified and/or used for any application other than that for which it was designed. If
you have any questions relative to a particular application, DO NOT use the machine until
you have first contacted the distributor to determine if it can or should be performed on the
product.
For technical questions please call 1-800-222-5381.
TECHNICAL SPECIFICATIONS
Capability
12V DC battery tester with charging system output
Load Test Capacity
125 Amps; 200-1000 Cold Cranking Amps (CCA)
Digital LED Display
Analog, 0-16V DC (maximum)
Test Cycle
5 seconds per test with 1 minute cool down; up to 3 tests in 5
minutes
Overall Dimensions
11-1/2” L x 7” W x 3-1/4” D
Features
5S auto cutoff and CCA set
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all
instructions listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this battery tester
until they have read this manual and have developed a thorough understanding of
how the battery tester works.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could
occur. It must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS