Product Manual

Page 12 of 17
After Each Use
⚠WARNING
 Do no touch the drill right after use.
 Do not remove the drill bits until the bit has cooled.
 Store the drill in dry and clean place.
 Keep the drill away from children.
Maintenance
⚠WARNING
 Do no touch the drill right after use.
 Do not remove the drill bits until the bit has cooled.
 Store the drill in dry and clean place.
 Keep the drill away from children.
Maintain the drill by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures. It is recommended that the general condition of any tool be
examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control. Keep handles dry, clean, and free from oil and grease. The following chart is based on a
normal operation schedule.
Maintenance Interval
Maintenance Point
Before each use
Inspect the general condition of the drill. Check for:
1. loose hardware,
2. misalignment or binding of moving parts,
3. damaged cord/electrical wiring,
4. cracked or broken parts, and
5. any other condition that may affect its safe operation.
After use
Wipe external surfaces of the drill with a clean cloth.