Product Manual

LOWERING THE JACK

1. Raise load high enough to allow clearance for the jack stands to be removed, then carefully remove jack

stands.

2. Remove support stands.

3. Grasp the handle firmly with both hands. Securely hold on to the jack handle so your hands do not slip and

ensure the release valve does not rapidly lower.

4. Carefully open the Release Valve by slowly turning the handle counterclockwise. Do not allow bystanders

around the jack or under the load when lowering the jack.

5. After removing jack from under the load, keep jack in the lowered position to reduce exposure to rust and

contamination.

WARNING USE EXTREME CAUTION WHEN LOWERING THE JACK. THE JACK HANDLE MAY TURN

RAPIDLY. OPENING THE RELEASE VALVE TOO FAST CAN CAUSE THE JACK TO LOWER RAPIDLY.

FAILURE TO HEED THESE WARNINGS COULD CAUSE SERIOUS INJURY OR DEATH.