Product Manual

Page 9 of 19
• Attach the manual handle (#24) to the tube container (#19). See Figure 5.
Figure 5
The completed assembly is shown below in Figures 6 and 7.
Figure 6 Figure 7
Before Each Use
⚠WARNING
• Disconnect from air supply before changing accessories or servicing.
Before each use, prime the grease gun by following the Operation Instructions until grease flows from
the tip (#10a). If the grease gun does not prime properly, follow the instructions below for venting
trapped air. Inspect the overall condition of the grease gun and look for:
• a damaged hose,
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, or
• any other condition that may affect its safe operation.
Venting Trapped Air
• Remove the gun body from the tube container by turning counter-clockwise.
• Install the manual handle to the tube container by turning clockwise. Make sure that the manual
handle is mounted securely onto the tube container.
• Pull up and then depress the lever of the manual handle to inject a small amount of grease.
• Repeat until enough grease is released.