Product Manual

Page 13 of 19
Filler Pump Loading
Refer to Figure 15.
• Pull back on the tube handle (#22) until it is fully extended. Lock it into place with the locking plate
(#23).
• Insert the filler plug on the end of the hose of a filler pump (not included) into the fill nozzle (#12)
of the grease gun.
• Follow the operating instructions provided in the filler pump manual (not included) to work the filler
pump until the tube container (#19) of the grease gun is full.
• Disconnect the grease gun from the filler pump.
• Press the locking plate to release the handle. Press the handle in as far as it will go.
Figure 15
Operating the Grease Gun
• Attach the rigid coupler assembly (#10) or the flexible hose assembly (#10b) to the grease gun
connector (#9). See Figure 16.
• Connect an air supply to the grease gun. Set the working pressure to be 90 PSI for the best
operation of tool.
NOTE: Use either the rigid coupler assembly or the flexible hose assembly depending on need and
project.
• Press the trigger (#4) to inject a small amount of grease. Release and press the trigger repeatedly
to inject more grease. See Figure 17.
• Disconnect the air supply from the grease gun before refilling it.
Figure 16 Figure 17