Product Manual

Page 4 of 22
Intended Use
The Ironton 1500 PSI Electric Pressure Washer is intended for cleaning the walls of buildings,
facades, terraces, footpaths, garden equipment, machinery, vehicles, tools, etc. with a pressure water
nozzle. If required, you can also use the pressure washer with added household cleaning agents.
The pressure washer is to be used only for its prescribed purpose, any other use is deemed to be a
case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Note that our equipment has not been designed for use in commercial, trade, or industrial
applications. Our warranty will be voided if the pressure washer is used in commercial, trade, or
industrial businesses or for equivalent purposes.
Packaging Contents
Handle (1)
Power Cord Bracket (1)
Water Filter Screen (1)*
Trigger Handle (1)
High-pressure Hose (1)
Screws (4)
Tip Cleaning Needle (1)
*Water filter screen comes pre-attached on the water inlet, located on the front of the pressure
washer.
Technical Specifications
Property
Specification
Power Source Requirement
120 Volt AC, 60 Hz
Rated Current
10 Amps
Max. Pressure
1500 psi
Max. Flow Rate
1.3 GPM
Electrical Cord
35 ft.
High-Pressure Hose
20 ft.
Inlet Water
Cold Tap Water, Max. 10F/ 40
Detergent Injection Rate
3%~12%
Important Safety Information
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be