Product Manual

Page 14 of 22
Shutting Down and Cleaning Up
 Turn the switch to the Off (O) position.
 Unplug the power cord from the outlet.
 Turn off the water supply.
 Press the trigger to release any remaining water pressure.
 Disconnect the garden hose from the water inlet on the washer.
 Engage the trigger handle’s safety lock.
Maintenance
Optimum Winterizing Procedure
Winterizing your pressure washer will help protect and prolong its life. We strongly recommend you
follow these steps using the *Pressure Washer Pump Guard. This will keep the internal parts
lubricated, protected from rust, and prevent the pump from freezing.
 Connect the Pressure Washer Pump Guard hose onto the water inlet.
 Depress the button on top of Pressure Washer Pump Guard container.
 Continue until fluid exits the pressure hose.
 Remove the hose from pump inlet (water inlet).
*Note: The Pressure Washer Pump Guard is not supplied with your pressure washer. It can be
purchased where you purchased this pressure washer and at most home center stores.
For more information call: 1-800-556-7885 and ask for item #1579000.
 For storage, remove water connection, turn on the washer for a few seconds, and press the trigger
handle to purge the remaining water in the pump. Turn off immediately.
⚠WARNING
 Disconnect the pressure washer from the power source before conducting any maintenance.
 Drain trigger handle assembly of any remaining water. Aim trigger handle downwards and
squeeze trigger.