Product Manual

Page of 22
7
TECHNICAL SPECIFICATIONS
Item
Description
Power Supply
115V, 20A, 60 HZ, Single Phase
No-Load Voltage
27 Volts AC
Output Range
60 - 80 Amp AC, Peak 125 Amp AC
Duty Cycle
20% @ 80A
Suggested Wire
Flux Core Wire
Wire Diameter
.030 - .035
Dimensions
17.7" x 9.3" x 14.3"
Weight
38 lbs.
KNOW YOUR WELDER
Description
The IRONTON Flux Core 125 is a portable Gasless Wire Feed Welder. It uses AC single phase
115V (110-120V), 60HZ/20amp with time delayed fuse or circuit breaker. It features two heat
settings, infinite wire speed control, over load and thermal protection.
The Flux Core 125 is ideal for use when welding mild steel 18 gauge to 3/16” for light industrial
applications (FOR USE WITH FLUX CORE WIRE ONLY).
ON/OFF Switch
In the “OFF” position no power is being supplied to the torch. In the “ON” position power is
supplied to the main transformer and control circuit.
Wire Compartment
Open the wire compartment door, and then you can see the wire feeder and spool holder.
Voltage Setting
1-2 switch is on the front panel of machine. There are two voltage settings. Refer to the “set up”
chart inside the wire feed compartment for initial adjustment settings.
Wire Speed Control
Adjustment of the wire feed speed (amperage).
On/off switch
Voltage Setting
Wire Speed
Control
Ground
Cable And
Clamp
Torch
Thermal Overload
Indicator