Product Manual

Page 8 of 13
oil.
1. Before changing the motor oil, drive the motor until the oil has a temperature of approx. 40°-50 °C
(104-140 °F). Cooler temperatures will reduce the flow rate due to the high viscosity of the oil. If
the oil is too hot, the sealing of the pump might be disturbed.
2. Shut down the engine after reaching a sufficient temperature.
3. Attach the suction probe (1) to the extraction pump (4) with the suction connector (2), and attach
the hose (7) to the extraction pump (4) with the drain connector (3). Fasten both connectors in
order to avoid the hoses coming loose due to the oil pressure.
4. Unwind the suction probe (1) and straighten it properly before inserting through the dipstick tube
into the engine, otherwise the pump will draw no or little oil.
Operating Instructions
⚠WARNING
 Do not use to pump water or any other liquid other than oil.
 Do not use with corrosive or flammable fluids.
 Do not run pump for more than 30 minutes.
 Not for use by or around children.
1. Insert the suction probe (1) into the oil dipstick tube and push it gently down to the lowest position
of the oil pan.
2. Use a suitable container to collect the old oil and lead the drain-hose into this container.