Product Manual

Page 6 of 13
CAUTION
PUMP USE AND CARE
Do not force the pump. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the pump when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Do not leave the tool running unattended.
Do not modify the oil extractor in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the oil extractor was designed.
Always check of damaged or worn out parts before using the oil extractor. Broken parts will affect
the oil extractor operation. Replace or repair damaged or worn parts immediately.
Store idle oil extractor. When oil extractor is not in use, store it in a secure place out of the reach
of children. Inspect it for good working condition prior to storage and before re-use. Never let old
or fresh oil seep into the ground or into the sewage system. You will harm the environment and
you will make yourself liable for prosecution. Collect the old oil and dispose at your local waste oil
collection station. Follow all applicable local ordinances.
Specific Operation Warnings
WARNING
To prevent serious injury or property damage, read and understand owner’s manual before
operating.
Always wear the proper personal protective gear including ANSI Z87.1 compliant safety goggles
and heat-resistant rubber gloves when using this product.
Do not use to pump water or any other liquid other than oil.