Product Manual

Page 10 of 13
no oil is
discharged.
2. Pump is not primed.
2. Check the priming instructions.
3. Defective vane.
3. Replace vane.
4. Suction lift too high.
4. Move pump closer to oil source.
Pump will not
run.
1. No power.
1. Verify that unit is plugged into 12 volt
outlet.
2. Impeller jammed.
2. Clean pump cavity and impeller.
Parts Diagram
Parts List
Reference
Part Description
Quantity
1
Suction Probe
1
2
Suction Connector
1
3
Drain Connector
1
4
Extraction Pump
1
5
Battery Clamps
1
6
On/Off Switch
1
7
10mm Hose
1