HALOGEN UTILITY LIGHTS OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an IRONTON product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS • If mounting this product requires drilling holes, the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process. Check both sides of the mounting surface before drilling begins. Also de-burr any holes and remove any metal shards or remnants. Install grommets into all wire passage holes. • Do not use a pressure washer to clean this product.
bracket/pedestal onto the mounting surface, keep light pressure for a while for maximum strength, then apply the supplied screws to secure the light units. ( Do not only use tape for mounting ) INSTALL THE WIRES/SWITCH • Disconnect the negative terminal of the vehicle’s battery. ( This may require resetting your radio, clock or other electronic devices when reconnected. ) • Route the red and the white wires through the fire wall.
WIRING DIAGRAM
PART DIAGRAM & PARTS LIST Part# Description Qty. 1 Halogen Lamps 2 2 Bracket 2 3 Mounting screw kit 2 4 Bracket screw kit 4 5 Complete Wiring Harness Kit 1 6 Switch with Housing 1 7 Double-sided adhesive tapes 2 For technical questions please call 1-800-222-5381.
WARRANTY One-year limited warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.
