Product Manual

Page of 10

1. Connect the included battery clamps or the DC plug to the wires from the panel by the J-plug

connectors.

2. If using the clamps: Attach the positive battery clamp (red, +) to the positive battery terminal (+)

and the negative battery clamp (black, -) to the negative battery terminal (-).

If using the DC plug: insert the plug into the vehicle’s 12-colt power socket.

3. Expose the panel to sunlight. The panel can be mounted on a windshield using the suction cups.

The solar panel will produce a current when exposed to sunlight. Direct sunlight will produce best

results. Diffused or low light will result in lower or no output.

Note: If LED light on the panel is not blinking this only shows that the LED light may have gone out and

is not indicative of the solar panel not working. Please test the panel with a multimeter to ensure proper

functionality.