Product Manual

Page 8 of 11
Before Each Use
Mount the unit on your vehicle with the mounting brackets and hardware that are included.
Attach the red wire of the LED light bar to the positive electrode of the wire harness. Attach the black
wire of the LED light bar to the negative pole of the wire harness. If you are not using the optional
wiring kit, we recommend using 18 ga. wire.
Be sure the light bulb is working properly and the position of the beam is as desired.
Operating Instructions
Wiring the LED Light Bar
To wire the LED light bar, the following tools are required:
• SCA driving light harness
• Drill, bits, and self-tapping screws
• Socket set
Mounting the Light Bar
Mount the light bar on a suitable sturdy location, keeping in mind local laws surrounding driving light
placement.