Parts catalog

Page 8
Parts Catalog Rail Assembly
support | ironridge.com | [phone]
v2.41
®
Calculating Rail Length
Calculate the row lengths as follows:
1. Add module widths.
2. Add width of UFOs between modules.
3. Add allowances for UFOs and Stopper Sleeves on ends of rail.
Depending on the location of the UFO, the clearance values will dier.
Location UFO
Mid Clamp 0.375”
End Clamp 1.0”
For example, to mount ve modules that are each 40” wide (in portrait), the row length is calculated as follows:
Step UFO
1. Add module widths 5 x 40” = 200”
2. Add width of mid clamps between modules 4 x 0.375” = 1.5”
3. Add allowances for end clamps 2 x 1” = 2
Total length of row 203.5” = 16.96’
Two 17’ rails will be required to mount this row of ve modules.
IronRidge stock rail lengths: 11’, 14’, 17’. Custom lengths available via special order. Contact IronRidge Customer
Service for additional details at 800-227-9523, or [e-mail].