UFO Tilt Mount Installation Manual

TILT MOUNT INSTALLATION MANUAL - 3© 2016 IRONRIDGE, INC. VERSION 1.10
CHECKLIST
PRE-INSTALLATION
☐ Verify module compatibility. See Page 10 for info.
TOOLS REQUIRED
☐ Cordless Drill (non-impact)
☐ Impact Driver (for lag bolts)
☐ Torque Wrench (0-250 in-lbs)
☐ 5/16” Socket
☐ 7/16” Socket
☐ 3/8” Socket (deep)
☐ String Line
TORQUE VALUES
☐ Tilt Leg Nuts (3/8" Socket): 250 in-lbs
☐ Bonded Splice Screws (5/16" Socket): 20 in-lbs
☐ Grounding Lug Nuts (7/16" Socket): 80 in-lbs
☐ Grounding Lug Terminal Screws (7/16 Socket): 20 in-lbs
☐ Universal Fastening Objects (7/16" Socket): 80 in-lbs
☐ Expansion Joint Nuts (7/16"): 80 in-lbs
☐ Microinverter Kit Nuts (7/16" Socket): 80 in-lbs
í If using previous version of: Integrated Grounding Mid Clamps,
Grounding Lug, End Clamps, and Expansion Joints please refer to
Alternate Components Addendum version 1.0
IRONRIDGE COMPONENTS
End Cap
XR Rail
Tilt Leg Kit
Bonded Splice
Stopper Sleeve
Wire Clip
Microinverter Kit
UFO
Grounding Lug Expansion Joint