JayBox Installation Manual

© 2022 IRONRIDGE, INC. VERSION 1.2 JAYBOX INSTALLATION MANUAL - 6
RAIL INSTALLATION
A. INSTALL RAIL HANGERS
Insert Rail Hangers onto rear of enclosure at locations
provided.
➢ Rail Hangers will click when fully seated.
B. MOUNT TO RAIL
Use rail-specic MLPE mounting hardware to attach Rail
Hangers to rail. Ensure junction box is pushed as close
to the rail as possible. Torque to 80-in lbs(1/2" or 7/16"
socket), do not overtighten.
➢ If installing in areas with ground snow loads greater
than 40 psf, install JayBox directly next to module
frame edge.
C. SECURE LID
Install wiring, conduit and ttings per NEC
requirements and following local AHJ guidance.
Using Philips Head Driver tighten the bolt.