FlashVue Tech Brief

Tech Brief
Moving Flashing Forward
We set out to design a ashing that checked all
the boxes: fully waterproof, fast and easy to install
correctly, economical, and strong enough to handle
every environmental condition. FlashVue does it all.
The optimized ashing design features a large
viewport, for easy alignment with the pilot hole. And
the GripCap and GripCap+ sit snugly in place, so
the lag can be driven single-handedly.
FlashVue™
GripCap & GripCap+
The 360º capable GripCap (2.74”
tall) and GripCap+ (3.74” tall) can be
placed in any orientation, and provide a
“friction-t” for easy installs. Push snug
into the viewport, without worrying it will
roll away or rotate while driving the lag.
Three-Tier Water Seal, Reimagined
FlashVue’s seal architecture utilizes three layers
of protection. The viewport is elevated 0.30”, and
provides a “friction-t” for the GripCap. The GripCap
fully covers the viewport while a sealing washer
adds another layer of protection. And an EPDM
washer and lag bolt “seal the deal” in the stack.
Large Viewport in Flashing
The large viewport makes it easy to
align the ashing with the pilot hole, and
drive the lag centered into the rafter. The
elevated rim not only provides a sturdy
dock for the GripCap or GripCap+, but
increases water-shedding capabilities.
⌀
0.75”
Triple Certied to
Protect the Roof
™
UL 2703, 441 (27)
TAS 100(A)-95