Manual
Table Of Contents
©
2021 IRONRIDGE, INC. VERSION 3.1 FLUSH MOUNT INSTALLATION MANUAL - 20
Use IronRidge's Microinverter Kit to bond compatible microstroage 
devices to the racking system. Insert Microinverter Kit T-bolt into top 
rail slot. Place compatible microstorage into position and tighten hex 
nut to 80 in-lbs.
Microinverter Kit
(80 in-lbs)
SYSTEMS USING MICROSTORAGE PRODUCTS
Insert Frameless Kit T-bolt in top rail slot. Place star 
washer over T-bolt, allowing it to rest on top of rail. 
Secure module clamps with a hex nut and torque to 80 
in-lbs. 
Place 
Star Washer
Module Clamp
(80 in-lbs)
Grounding Lugs
Required on Every Rail
FRAMELESS MODULE KITS
COMPATIBLE PRODUCTS
PHAZR 
PHAZR Devices PHAZR-X, where X is 6-12.
Solpad
Solpad Inverter model SI-1k
Solpad Battery Storage model SB-2K 
Solpad Junction Box model SJB-4k
 ➢ Running a separate equipment grounding conductor to the PHAZR or 
Solpad devices is not required. 
 ➢ If installing in areas with ground snow loads greater than 40 psf and 
underneath a module, install PHAZR and Solpad devices as close as 
possible to module frame edge.
 ➢ Solpad may only be installed on XR-100 and XR-1000
 ➢ Solpad may only be installed with modules having a frame thickness of 
35mm or greater. 
 ➢ Use the number of IronRidge Microinverter kits allowed by the microstorage 
mounting ange. Some will require 1 kit and others 2 kits.
COMPATIBLE PRODUCTS
Sunforson
Sunforson silver or black SFS-UTMC-200(B) mid and SFS-UTEC-
200(B) end clamps. 
Sunpreme
Sunpreme silver or black mid and end clamps with part numbers 
7500105X where "X" is 1, 5, 6 or 7. 
Ironridge
IronRidge silver or black mid and end clamps with part numbers 
FMLS-XC-001-Y where "X" is E or M and "Y" is B or blank.
 ➢ Follow module manufacturer's installation instructions to install
the module clamps. 
 ➢ Frameless modules require using a Grounding Lug on every rail.
 ➢ For Sunpreme Modules Only: If required to use slide prevention 
hardware, see Module Slide Prevention Addendum (Version 
1.10).
Two sets of two 
Microinverter Kits
(80 in-lbs)
Solpad
PHAZR










