Contour Tech Sheet

© 2022 IronRidge, Inc. All rights reserved. Visit www.ironridge.com or call 1-800-227-9523 for more information. Version 1.0
Tech Brief
Contour
™
Components
Array Congurations
Contour
™
Trim
Trim comes in 84” lengths of black
powder-coated aluminum. Pieces can
be cut to length to t the array edge.
Contour
™
Splice
The Splice connects two pieces of
Trim together, tool-free. Trim easily
slide and can be pushed into place.
Contour
™
Clamp
The Clamp secures to bottom ange
of most modules. T30 Torx bolts used
to reduce visible gaps (bit included).
Contour
™
Outer Corner Cap
The Outer Corner Cap easily slides
onto Trim, without any tools, to wrap
Trim around outside array corners.
Contour
™
Inner Corner Cap
The Inner Corner Cap easily slides
onto Trim, without any tools, to wrap
Trim around inside array corners.
Contour
™
End Caps
The Ends Caps are a pair, for the left
and ride side of Trim. Equipped with a
metal clip, they grip rmly in place.
Project BOMs in Design Assistant
Our online design tool helps speed up
the planning process. Obtain part lists,
quotes, documentation and more.
Get Started at IronRidge.com/design
Contour
™
provides fully-customizable options. Trim and End Caps can cover the
south edge while Corner Caps can extend the Trim to wrap around the sides.
Conguration #1: Southern Array Edge
Conguration #2: Simple Array Wraparound
Conguration #3: Complex Array Wraparound

Contour
™
Clamp
Module Compatiblity
The Clamp has been tested
or evaluated with all modules
having frames in the above
referenced dimensions. Make
sure modules being used meet
these dimension requirements.