Contour Install instructions

Table Of Contents

2022 IRONRIDGE, INC. VERSION 3.5 FLUSH MOUNT INSTALLATION MANUAL - 2

RATINGS

Product markings are located on the Grounding Lug bolt

head.

MARKINGS

UL 2703 LISTED

Conforms to STD UL 2703 Standard for Safety First Edition: Mounting Systems, Mounting Devices, Clamping/

Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels

• Max Overcurrent Protective Device (OCPD) Rating: 40A

• Max Module Size: 30.5 ft²

• Module Orientation: Portrait or Landscape

• System Design Load Rating: 10 PSF downward, 5 PSF upward, 5 PSF lateral

• Actual system structural capacity including spans and cantilevers are dened by PE stamped certication letters.

• CAMO Specic Design Load rating: 50 PSF downward, 50 PSF upward, 15 PSF lateral

Certied to CSA TIL No. A-40 Photovoltaic Module Racking Systems

• Load Rating: 2400 PA [50 PSF]

CLASS A SYSTEM FIRE RATING PER UL 2703

• Any Roof Slope with Module Types 1, 2, 3, 13, 19, 25 & 29: Allowed with any roof slope. Any module-to-roof gap is

permitted, with no perimeter guarding required.

• Module Type 5: Allowed with Steep Slope Roofs (≥ 9.5°). Any module-to-roof gap is permitted, low edge guarding

(Trim) required

• Class A rated PV systems can be installed on Class A, B, and C roofs without a󰀨ecting the roof re rating

WATER SEAL RATINGS:

• UL 441 (Flashfoot2, All Tile Hook, Knockout Tile, Flashvue, L-Mount)

• TAS 100(A)-95 (Flashfoot2, All Tile Hook, Knockout Tile, Flashvue, L-Mount, Qbase)

• Tested and evaluated without sealant.

• Any roong manufacturer approved sealant is allowed. Ratings applicable for roof slopes between 2:12 and 12:12

STRUCTURAL CERTIFICATION

• Designed and Certied for Compliance with the International Building Code & ASCE/SEI-7

FLORIDA PRODUCT APPROVAL #FL29843

• Conforms to TAS202, TAS100(A)

• Approved for installation both inside and outside High Velocity Hurricane Zones (HVHZ)

• Allowable design pressure up to +100/-100 PSF

• Additional details and full list of approved components can be found Here.

#5003807