Installation Guide

All Tile Hook

7.09

5.51

1.18

2.13

7.5

3.8

NO.

DESCRIPTION

ASSY, ALL TILE HOOK

BOLT, LAG 5/16 X 4"

BASE

WEIGHT: LBS

SHEET 1 OF 1

SIZE

SCALE:1:4

DO NOT SCALE DRAWING

ASSY, ALL TILE HOOK

PAGE 1
All Tile Hook 7.5 3.8 2 1.18 7.09 1 2.13 5.51 NO. 1 2 3 DESCRIPTION ASSY, ALL TILE HOOK BOLT, LAG 5/16 X 4" BASE © 2019 IronRidge, Inc. All rights reserved. Visit www.ironridge.com or call 1-800-227-9523 for more information. 3 ASSY, ALL TILE HOOK SIZE A SCALE:1:4 DO NOT SCALE DRAWING WEIGHT: LBS SHEET 1 OF 1 ATH-MAN REV 1.
PAGE 2
All Tile Hook Installation Tools Required: tape measure, chalk, caulking gun, driver, 7/16’’ hex socket, and 1/4’’ drill bit (optional: stud finder and tile grinder) 1 2 Torque to 132 in-lbs Rafter Position base over rafter, adjust arm if necessary and torque hardware to 132 in-lbs (11 ft-lbs). Position arm near center of valley for curved tiles, and away from joining seam for flat tiles. Remove tile and locate rafter.