Owners manual

Tool:

2 Wrenches (#13 & #17)

Step 4:

Pull up on the Adjustable Instep Frame Knob (40), slide the Adjustable Instep

Frame (5) completely out of the Adjustable Boom (3) and then turn the Adjustable

Instep Frame (5) with the adjustable holes facing up. Release the Adjustable

Instep Frame Knob (40) and adjust the Adjustable Instep Frame (5) slightly until

the Adjustable Instep Frame Knob (40) locks into place.

Step 5:

Slide the Foot Bar (4) into the bottom of the Adjustable Boom (3) and align the

hole on the Foot Bar (4) with the hole on the Adjustable Boom (3). Secure the

Foot Bar (4) in place using one M10x42mm Hexagon Head Bolt (46), one

Ø18xØ10.5x2.0 Flat Washer (47), and M10 Nylon Nut (48).

Hardware:

ASSEMBLY

(47) Flat Washer

Ø18xØ10.5x2.0

1 PC

(48) Nylon Nut M10

1 PC

(46) Hexagon Head Bolt

M10x42mm

1 PC