Owners manual

Step 3:

Mount the Backrest Frame (2) to the Pivot Arms (11) by inserting the ends of the

Pivot Arms (11) into the brackets, located at each side of the Backrest Frame (2),

align to the bolt holes on the Pivot Arms (11) and brackets. Using four

M8x20mm Hexagon Socket Head Cap Bolts (28), four Ø16xØ8.5x1.5 Flat

Washers (19), and four M8 Nylon Nuts (42) to attach the Backrest Frame (2)

onto the Pivot Arms (11). Tighten bolts and nylon nuts with the Wrench and

Allen Wrench provided.

Hardware:

ASSEMBLY

Tool:

Allen Wrench #6

1 Wrench (#13 & #17)

(42) Nylon Nut M8

4 PCS

(28) Hexagon Socket Head

Cap Bolt M8x20mm

4 PCS

(19) Flat Washer

Ø16xØ8.5x1.5

4 PCS