MSDS

ManualsBrandsIRONFORCE ManualsPaint4.3 oz. Multi-Purpose Rubber-Based Spray Adhesive

SAFETY DATA SHEET

IronForce Multi-Purpose Spray Adhesive

Revision Date: May 16, 2014 Page 1 of 9

1. IDENTIFICATION

Product Name

IronForce Multi-Purpose Spray Adhesive

Recommended use of the chemical and

restrictions on use

Identified uses

Spray Adhesive

Company Identification

Berry Plastics Corporation

25 Forge Parkway

Franklin, MA 02038

Customer Information Number

(800) 248-7659 (Monday – Friday 8:00 am to 5:00 pm)

msdstechnical@berryplastics.com

Emergency Telephone Number

Chemtrec Number

Within USA and Canada: 1-800-424-9300 CCN22955

Outside USA and Canada: +1 703-741-5970 (collect

calls accepted)

Issue Date

May 16, 2014

Supersedes Date

March 20, 2014

Safety Data Sheet prepared in accordance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200)and the Globally

Harmonized System of Classification and Labelling of Chemicals (GHS)

2. HAZARD IDENTIFICATION

Hazard Classification

Flammable Aerosols - Category 1

Serious eye damage/eye irritation - Category 2A

Skin corrosion/irritation - Category 2

Specific Target Organ Toxicity Repeat Exposure - Category 2

Specific Target Organ Toxicity Single Exposure - Category 3

Toxic to Reproduction - Category 2

Aspiration hazard - Category 1

Label Elements

Hazard Symbols

Signal Word: Danger

Hazard Statements

Extremely flammable aerosol.

Causes serious eye irritation.

Causes skin irritation.

May cause drowsiness or dizziness

May cause damage to organs (nervous system) through prolonged or repeated exposure (Inhalation).

May be fatal if swallowed and enters airways.

Summary of content (9 pages)

PAGE 1
SAFETY DATA SHEET IronForce Multi-Purpose Spray Adhesive 1. IDENTIFICATION Product Name Recommended use of the chemical and restrictions on use Identified uses Company Identification Customer Information Number Emergency Telephone Number Chemtrec Number Issue Date Supersedes Date IronForce Multi-Purpose Spray Adhesive Spray Adhesive Berry Plastics Corporation 25 Forge Parkway Franklin, MA 02038 (800) 248-7659 (Monday – Friday 8:00 am to 5:00 pm) msdstechnical@berryplastics.
PAGE 2
Berry Plastics Corporation 2. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive HAZARD IDENTIFICATION Precautionary Statements Prevention Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flame/hot surfaces. - No smoking. Wear eye protection/face protection/protective gloves/protective clothing. Do not handle until all safety precautions have been read and understood.
PAGE 3
Berry Plastics Corporation 3. COMPOSITION/INFORMATION ON INGREDIENTS Component Acetone Propane n-Hexane Dimethyl Ether 2-methylpentane 3-methylpentane 4. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive CAS Number 67-64-1 74-98-6 110-54-3 115-10-6 107-83-5 96-14-0 Concentration 20 - 30% 20 - 30% 10 - 20% 10 - 20% 1 - 10% 1 - 10% FIRST- AID MEASURES Description of necessary first-aid measures Eyes Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open.
PAGE 4
Berry Plastics Corporation 6. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Wear appropriate protective clothing. Eliminate all sources of ignition. Use non-sparking scoops for flammable materials. Environmental Precautions Prevent the material from entering drains or watercourses. Notify authorities if spill has entered watercourse or sewer or has contaminated soil or vegetation.
PAGE 5
Berry Plastics Corporation 8. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive EXPOSURE CONTROLS/PERSONAL PROTECTION Appropriate engineering controls Engineering methods to prevent or control exposure are preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process conditions.
PAGE 6
Berry Plastics Corporation 10. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive STABILITY AND REACTIVITY Reactivity Data is not available Chemical Stability Stable under normal conditions. Possibility of hazardous reactions Hazardous polymerization will not occur. Conditions to Avoid Heat, sparks, flames - contact with incompatible materials Incompatible Materials Strong oxidizers Hazardous Decomposition Products Oxides of carbon - aldehydes 11.
PAGE 7
Berry Plastics Corporation 11. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive TOXICOLOGICAL INFORMATION Carcinogenicity Not considered carcinogenic by NTP, IARC, and OSHA. Germ Cell Mutagenicity Available data indicates this product is not expected to be mutagenic. Reproductive Toxicity Hexane: In animal studies adverse reproductive and developmental effects were seen. Aspiration Hazard Available data indicates this product may be an aspiration hazard.
PAGE 8
Berry Plastics Corporation 15. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive REGULATORY INFORMATION United States TSCA Inventory All ingredients have been verified for inclusion or are exempt from listing on the EPA Toxic Substance Control Act Chemical Substance Inventory. Canada DSL and NDSL Inventory All ingredients in this product have been verified for inclusion or are exempt from listing on the Domestic Substance List (DSL). WHMIS Classification B5. D.
PAGE 9
Berry Plastics Corporation 16. Safety Data Sheet IronForce Multi-Purpose Spray Adhesive OTHER INFORMATION TLV: Threshold Limit Value TSCA: Toxic Substance Control Act Information Source and References This SDS is prepared by Hazard Communication Specialists based on information provided by internal company references. Prepared By: EnviroNet LLC. The information and recommendations presented in this SDS are based on sources believed to be accurate.