Installation Guide

ManualsBrandsIroncraft ManualsFence Posts(Common: 2-in x 3-3/8-in x 4-ft; Actual: 2-in x 3.7-in x 4.2-ft) Euro Black Powder Coat Steel Decorative Metal Fence Universal Post

1

2

3

CORNER PANELS

If installing on a corner, holes must be drilled on the appropriate side to make a 90° angle. When drilling, make

sure they are aligned with the pre-drilled dimples. Once holes are drilled, install panels in the same manner as

GATE INSTALLATION

8.75” - Top Post Hinge (40.25” for the bottom post hinge)