Installation Sheet

ManualsBrandsIron-A-Way ManualsCabinet HardwareIroning Center - 46" Built In Fixed Position Ironing Board With Storage - Left Hinged Door - Non Electric

1

2

3

4

5

6

4. INSTALL UNIT INTO WALL

Begin installation by carefully lifting

unit into the wall opening.

Make sure the cabinet is plumb and

level. If needed, add shims to help

unit t space.

5. ATTACH CABINET TO STUDS

Using the pre-drilled holes in top of

cabinet, attach unit to studs with two

#10 x 1

1/2

” screws for top installation.

Finish installation by inserting the

#14 x 2

1/2

” screws in bottom

pre-drilled holes.

6. FINISH INSTALLATION

7. INSTALLATION COMPLETE!

Cabinet is now fully installed! If desired,

decorative trim or molding may be

added to cover any irregularities in the

wall.

Example shown with studs

to illustrate mounting.