Specification Sheet

Page 3 of 3
Electrical Requirements for E-42
Unit requires 115/120v, 15 amp. supply line. Pigtails are
provided in the bottom of wire raceway for hookup to
supply line. Make entrance into knockout provided in top
of raceway through le-hand vent hole.
Recommended Standing Room Clearance
Be sure to check that you have adequate standing space
(at least 24”) to stand beside the ironing board to iron.
Installation Heights
Use the provided Installation Height Chart on page 1 to
determine your desired ironing board height.
Door
Ironing center comes standard with a flat maple veneer
door and a variety of additional door options. Door
opens approximately 180°, flush against the wall. Please
be sure to allow 16” to the side of unit for the door to
open fully open.
Hinge Side
Unit comes standard with the hinge on the right. A le
side hinge can be requested when placing order.
Unfinished Cabinet
The exterior of the cabinet is unfinished and ready to be
painted or stained to match existing decor.
Questions?
Give us a call at 1-800-536-9495
or email [e-mail]
Items to Note - Continued: