Installation Sheet

ManualsBrandsIron-A-Way ManualsCabinet HardwareIroning Center - 42 Inch Built-In Swiveling Ironing Board With Electric System, Light and Timer - Left Hinged Door

1

2

3

4

5

6

7

8

Example shown with studs

to illustrate mounting.

Pre-drill holes into the cabinet using

the holes in side brackets where

screws were just removed.

Finish installation by screwing the

two #14 x 2

1/2

” screws into the

pre-drilled holes to secure bottom

part of cabinet into the cabinet.

9. PRE-DRILL HOLES IN SIDES

10. CONNECT WIRES

Connect all power supply wires and

ground wires in accordance with

electrical codes. Trim supply wire as

necessary.

11. REPLACE ELECTRICAL RACEWAY

Place the raceway cover into

position, ensuring that no wires

are pinched. Reinstall the top and

bottom screw to secure in place.

Reconnect power supply.

8. INSTALLATION COMPLETE!

Cabinet is now fully installed! If desired,

decorative trim or molding may be

added to cover any irregularities in the

wall.