User Manual

EN
Roomba
®
900 Series Owner’s Guide 3
Using Your Roomba
Use Instructions
Turn your robot over and remove the bin insert and battery pull tabs. Then place
Roomba on the Home Base to activate the battery.
Roomba has a partial battery charge, so it’s ready to start cleaning.
Note: Roomba ships with a partial battery charge. If you start a cleaning cycle before
charging the battery fully, Roomba may return to the Home Base to recharge sooner
than it will during future cleaning cycles. To fully charge the battery before the first
cleaning cycle, allow Roomba to charge on the Home Base for 3 hours.
Note: Remove excess clutter from floors before cleaning (e.g. clothing, toys, etc.). Use
Roomba frequently to maintain well-conditioned floors.
If its battery gets low before finishing a cleaning cycle, Roomba returns to the Home
Base to recharge. It will not play a tone when it docks and its CLEAN button will pulse
with the battery indicator ( ).
» After its battery has been recharged, Roomba automatically returns to where it left
o and completes the cleaning cycle.
» You can check the iRobot HOME App for a current status of your Roomba.
If Roomba is returning to recharge after completing a cleaning cycle, it will play a
series of tones to indicate successful completion of the cleaning cycle.
To pause Roomba during a cleaning cycle, press CLEAN.
To resume the cleaning cycle, press CLEAN again.
To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN
until Roomba’s indicators turn o.
To send Roomba back to its Home Base during a cleaning cycle, press CLEAN and then
(DOCK) on Roomba or press CLEAN on the iRobot HOME App main screen. This will
end the cleaning cycle.
Positioning the Home Base
®
Place the Home Base in an open, uncluttered area leaving the following
distances around the Home Base:
At least 1.5 feet (0.5 meters) on each side of the Home Base
At least 4 feet (1.2 meters) in front of the Home Base, and at least 4
feet (1.2 meters) away from stairs
At least 8 feet (2.4 meters) from Virtual Wall Barriers
Always keep the Home Base plugged in and make sure it is in an area with
consistent Wi-Fi
®
coverage to allow Roomba to receive information via the
iRobot HOME App.
Download the iRobot HOME App and connect to Wi-Fi
®
:
Watch an overview video with instructions on how to set-up and use
your Roomba
Set an automatic cleaning schedule (up to 7 times per week) and
customize cleaning preferences
Enable automatic Software updates
Access to tips, tricks, and answers to commonly asked questions