User Manual

8 For Customer Care go to www.irobot.com/Roomba900
EN
Pinch the yellow extractor
frame release tabs, lift up the
extractor frame and remove
any obstructions.
1
Remove the extractors and
remove the yellow extractor caps.
Remove any hair or debris that
has collected underneath the
caps and around the metal axles.
Reinstall the extractor caps.
2
Cleaning the Extractors
Cleaning the Sensors and
Charging Contacts
Wipe the sensors with a clean, dry cloth.
Do not spray cleaning solution directly
onto the sensors or sensor openings.
1
Wipe the charging contacts
on Roomba and the Home
Base with a clean, dry cloth.
2
Remove hair and debris from the
square and hexagonal plastic
pegs on the other side of the
extractors.
3
Clear the vacuum path.
4
Reinstall the extractors. Match the
color and shape of the extractor
pegs with the color and shape of
the extractor icons on the cleaning
head module.
5