User Manual

6 For Customer Care go to www.irobot.com/Roomba900
EN
Emptying the Bin
Note: If the Full Bin indicator ( ) comes
on at any time during a cleaning job,
you can always pause the cleaning job
to empty the bin and then continue
cleaning.
If the Full Bin indicator ( ) is
illuminated but the bin does not
appear to be full, refer to Full Bin
sensor cleaning instructions.
Important: The filter door won’t
close unless a filter is reinserted.
Insert the filter with the tab facing
up. Replace the filter every two
months.
Remove filter by grasping the
tab.
1
Shake o debris by tapping
the filter against your trash
container.
2
Open bin door to
empty bin.
2
Press bin release
button to remove bin.
1
Cleaning the Filter
Remove and empty the bin.
1
Cleaning the Full Bin Sensors
Inner Sensor Ports
Wipe the inner and outer sensor ports
on the bin with a clean, dry cloth.
2
Outer Sensor Ports