Owner's Manual

Pro-Clean Reservoir Pad
• Hand rinse with water in the sink to clean. Do not put the reservoir pad in
the dishwasher. Do not wash with soap.
• Let dry completely before re-attaching to Braava after cleaning is
complete.
• The wick is designed for repeated use. Do not remove the wick cap
between cleaning operations.
• If the wick cap becomes dirty or shows wear, it can be replaced.
• Remove the wick cap by pulling on the side rubber tab.
• Replace with a new wick cap, pressing firmly into place to create a
tight seal to prevent leaking.
Removing or Changing the Battery
• With Braava
®
unplugged and pad the and cloth removed, place Braava
®
on a flat surface with its wheels facing up.
• Locate the battery compartment screw between the wheels.
• With a coin or flathead screwdriver, remove the screw and open the
battery door.
• Lift the battery pack out of the robot and gently unplug the connector
from the port.
• Plug the connector of your new Braava
®
battery pack into the port.
• Place the battery pack into Braava
®
, ensuring the connecting wires are
tucked into the compartment.
• Reinstall the battery door and secure the screw using a flathead
screwdriver or coin.
For more information, please visit: www.irobot.com/Braava300