Mopping Robot 300 Series Owner’s Manual
Maintenance To keep your Braava in the best working condition, follow these maintenance steps. Cleaning and Storing • Use a dry cloth to wipe dust or dirt from Braava’s exterior. Do not rinse or submerge in water. • Use a damp cloth to wipe off dust and dirt on tyres. Make sure that Braava is not plugged in and that the cloth is not dripping. • Place Braava on its end (handle side down) when charging or storing between uses. • For long term storage, remove the C batteries from the NorthStar Cube.
Pro-Clean Reservoir Pad • Hand rinse with water in the sink to clean. Do not put the reservoir pad in the dishwasher. Do not wash with soap. • Let dry completely before re-attaching to Braava after cleaning is complete. • The wick is designed for repeated use. Do not remove the wick cap between cleaning operations. • If the wick cap becomes dirty or shows wear, it can be replaced. • Remove the wick cap by pulling on the side rubber tab.
