User Manual

Fill the Robot

• Filling the tank is required for Wet Mopping or Damp Sweeping. When wet

mopping, you may add Cleaning Solution to the tank before adding water.

This product is a concentrate. Refer to instructions on the bottle for proper

measurement.

• Lift the robot handle to ﬁnd the tank cap. Then lift and swivel the cap open.

• To ﬁll the tank completely, tilt the robot so that the front left corner is pointed

downward and the tank opening is highest. Fill slowly with warm water. If you

areusing the Braava jet

Hard Floor Cleaning Solution, add solution and then

ﬁll with water.

• Turn the cap back and close. Then lower the robot handle before starting

therobot.

Note: If you are using

a Dry Sweeping Pad,

skip to Step 4.

Important: Braava jet®

Hard Floor Cleaning

Solution is the only

solution that can be

safely used in your robot

mop. Please do not use