User Guide

Power
Management
1. Press the [Power] until power comes on.
2. When the product is on, press and hold the [Power] until power
goes off.
05
Power on/off
This model supports an automatic power-saving feature to minimize battery consumption.
Depending on [Setting – Timer - Auto Power Off], the product will be automatically turned
off when keys are not operated for a specified time. (Refer to page 21)
Current time and memory data are preserved during reset.
To avoid damaging the memory, do not use reset function while the device is playing.
1. Lock the device during use by pressing [Power].
2. Unlock the device by pressing [Power] again.
Using the Hold Function
1. If buttons will not work while the device is being used, press [RESET].
Using the Reset Function
To avoid malfunctions, only use the USB cable provided. Verify that the device is
connected to a high-power USB 2.0 port. Some low-power USB ports built into certain
peripheral devices, such as some types of keyboards and USB hubs without internal
power, may not provide enough power to charge the device.
While the PC is switched to standby mode, the device may not be charged.
Turn the device off when charging. Leaving the device turned on during recharge may
prevent “Charge Complete” from being displayed.
The battery will be fully charged within about 2 hours 30 minutes. (Based on fully
discharged, power Off).
The charging time might be extended if you use the product while charging.
1. Turn on your computer.
2. Connect the device to your computer. The internal battery will
charge automatically.
Charging the Battery
Getting Started