User Guide

10
2. Select the desired file checkboxes to transfer from the computer to
the deviceand then click [Transfer] or drag & drop the file to the
Device icon at the bottom or Device window.
File transfer status is displayed in the [File Transfer] tab.
3. When the file transfer is complete, the selected music files have
been added to the device library.
1. Connect the device to the computer’s USB port and then execute
iriver plus 4.
2. Select [Device > Initialize Disc]. When the window pops up asking
whether to proceed with initializing the disc, click [Start].
3. When the initialization process is finished, the Complete window will
be displayed and the device can be disconnected from the computer.
Initializing the Disc
File recovery is not possible once files have been deleted from the device. Backup all data
BEFORE initializing the disc.
1. Connect the device to an online computer’s USB port and then
execute iriver plus 4.
2. Select [Device > Firmware Upgrade], and the Upgrade window will
be displayed. Complete the firmware upgrade by following the
instruction window.
Upgrading the Firmware
Insufficient battery power may prevent initiation of firmware upgrade.
Never disconnect the device from the computer while downloading a firmware upgrade file.
After the download is completed, the upgrade will be initiated when the device is
disconnected from the computer.
A pop-up window will display the version of firmware installed.
When newer firmware versions are available, a notification window will be displayed when
the device is connected to the computer.
Getting Started