User's Manual

ENGLISH
TWS is a method of wirelessly connecting two independent speakers to
output discrete stereo sound separately to the left and right channels.
1. Turn on the power of two speakers you
want to connect via TWS to set them in
pairing standby mode.
2. Press the [ ] button of the speaker you
want to set as the left channel to begin
the TWS connection process with the
signal tone. The other speaker will
automatically be set as the right channel,
and the LED light will be solid blue.
3. When the connection is complete, the left-
channel speaker will play the [Left Channel]
sound, and the LED light will flash blue.
4. When you search for the speakers from
a compatible device, only the [SKT_CS100-
XXXXX] left-channel speaker will be displayed.
1. Press and hold the [ ] button to reset all TWS and Bluetooth settings.
Reset TWS and Bluetooth
TWS (True Wireless Stereo) Connection
Flashing Blue
Flashing Blue
Left Channel
Flashing Blue
Right Channel
TWS
1. Press and hold the [ ] button to turn
on the device. The [Power On] sound will
play indicating that the device is on, and
the status LED will flash blue.
2. While the device is on, press and hold the
[ ] button to turn off the device. The
[Power Off] sound will play indicating
that the device is off.
Power ON/OFF
Flashing
Blue
SKT_CS100-XXXXX
1. When the power is turned on, the
device will automatically switch to
pairing standby mode.
LED: Flashing Blue
Sound: Bluetooth Input Ready
2. When detected, the speaker will
appear as [SKT_CS100-XXXXX] on
a Bluetooth-enabled device.
3. Select [SKT_CS100-XXXXXX] on your
device to complete the pairing.
LED: Solid Blue
Sound: Bluetooth Connected
4. When paired, press and hold the [ ]
button to disconnect from a Bluetooth
-enabled device.
Bluetooth Pairing
Maximum Range: 10 m (32.8 ft.)