Operation Manual

87
How to recognize barcodes
(This section applies to Readiris Corporate only)
In Readiris Corporate you can recognize barcodes. Barcodes can be used to separate documents in a batch.
Note: Readiris supports most widespread 2D barcodes. Readiris supports laser printed and inkjet printed
barcodes.
To define which barcodes Readiris should recognize:
 Click the Readiris button, and then click Advanced Settings.
 Click the Barcodes tab.
 Select the barcode types you want Readiris to recognize.
Important note: Readiris automatically recognizes barcodes to separate documents, but the barcodes
zones themselves are not recognized as barcodes. In most case, they are recognized as images.
Recognizing barcodes manually:
 Scan or Open your document.
 Click the Zones tab.
 Click the Barcode icon and draw a frame around the barcode.
 OR right-click the barcode zones that are incorrectly recognized as image, then point to Zone >
Type and select Barcode.
 Then go to the Output File group and configure the output settings to save or send your document.
Recognizing a particular barcode
In case you need to use the content of a particular barcode:
 Draw a barcode zone around the barcode.
 Then right-click inside the zone and click Copy as Data.
The content of the zone is copied to the Clipboard. You can now paste it in other applications.