Operation Manual

Readiris 16 - User Guide
16
Select <Twain><OTHER MODELS with duplex feeder> when you are using a duplex
scanner, which scans both the front and backside of a page.
 Once you've selected a scanner model, you must configure you scanner driver.
o Click Configure to select your scanner driver.
If you do not see your scanner listed in the Select Source window, then your scanner driver
has not been installed properly. Re-install your scanner driver before trying to configure it in
Readiris. The scanner driver can usually be found on the website of your scanner
manufacturer.
Note: you can also configure the scanner driver directly on the main toolbar. Just click the
down arrow beneath Scan and click Select Source.
o Once the scanner has been configured you can start scanning, using the default scanner
settings. For more information about the different scanner settings and how to change them,
see the topic Selecting the Scanner Settings.