Operation Manual

Section 8: Editing the Recognized Documents

Manually drawing zones

 Click the Layout icon to display the Layout toolbar.

 Click the zone type you want to create. E.g. Text.

 Click and hold the mouse button and draw a frame around the section to want to recognize as text.

Note that barcode zones must always be drawn manually. They are not created automatically by the

Page Analysis feature.

Changing the zone type

 Ctrl-click a zone, and then select the required zone type from the Context menu.

 Click the Layout icon to display the Layout toolbar.

 Select the zone you want to change.

 Click the required zone type icon in the Layout toolbar. E.g. Graphic.

 Then click the required zone type icon again.

Tip: notice the tooltips at the bottom of the interface. They describe which actions you can do.

Changing the sort order of zones

 Click the Layout icon to display the Layout toolbar.

 Click the Sort icon.

The numbers now disappear from the zones.

 Now click the recognition zones one by one, in the order you want to sort them in.

Zones you do not click, will be excluded from recognition.

 When you have click all the zones on the page, Readiris automatically quits the Sort mode.

You can also quit the Sort mode by clicking the Sort icon again. You will be prompted whether or

not to keep the new sort order.