Operation Manual

Readiris 16 - User Guide
34
or
 Click Don't learn to save the result as unsure.
Use this command for damaged characters which could be confused with other
characters if trained. E.g. the number 1 and the letter I, which have an identical form
in many fonts.
 Click Delete to delete characters from the output.
Use this button to prevent document noise from appearing in the output file.
 Click Undo to correct mistakes.
Readiris keeps track of the last 32 operations.
 Click Abort to abort Training mode.
All training results will be deleted. Next time you process a document, Training Mode
will start again.
When Training Mode has finished, you can now save the Training Results sets.
Combining Training Mode with Training Results Sets
As stated above, you can use the Training Mode combined with a Training Results set, in order to store the
training results permanently. Using Training Results Sets is recommended when you are processing
multiple documents that have the same typographic characteristics.
 Go through Training Mode as explained above.
 Return to Settings > Training Mode.
 Click Save to save the Training Results set.
 Name the Results set and save it in a location of your choice.
Note: Results sets are limited to 500 shapes. You are recommended to create separate sets for
specific applications.
Now you have several possibilities:
 You can select Start to create a new training results set.
In this case a new Training Mode process starts.
 You can select Add to current training results set.
In this case the new Training results are only stored temporarily and they are not stored in the
Results set you saved.
 You can click Select, browse for the Results set you saved and select Start to add to training
results from <YourFileName.dict>.
In this case the new Training results are added to the Results set you saved.