Operation Manual

To set up a Watched Folder configuration:
Click the down arrow beneath the From File button.
Then click Watched Folder.
Note that the Watched Folder option is only available when no documents are opened in
Readiris.
Click New watched configuration.
Browse for the input folder to which you will scan the documents. Click OK to confirm.
In case you want to apply the current Readiris configuration to the Watched Folder, keep the
option Default settings selected.
Note that the option Select Output text folder is only available when the output is set to
Save as File in the current Readiris configuration.
The option Select output format is only available when using Specific settings.
In case you want to apply specific settings to a Watched Folder configuration, select the
option Specific settings.
Now the Output settings screen appears.
Select the output format, destination and lay-outing options. For more information see
Section 8: Saving Documents and Section 9: Sending Documents to the Cloud
.
Click OK to confirm.
Tips:
o If you want Readiris to process the subfolders of a Watched Folder, then select
Process subfolders.
Note: when the Process subfolders feature is activated, it is not possible to use a
subfolder of an existing watched folder as watched folder in a new watched folder
configuration.
Example: in Configuration 1 you select Process subfolders and you use C:\Input as
Watched Folder. C:\Input has a subfolder called Batch1. In that case C:\Input\Batch1
cannot be used as Watched Folder in Configuration 2.
38