Operation Manual

Scanner model
Click Scanner Model to select your scanner profile from the list. The scanner profile allows you to
access features specific to your scanner. For example, duplex scanning (ADF). Settings that are
unavailable for your scanner are not displayed or grayed out.
Do not worry if you don't see your scanner in the list; not all scanners have specific scanner profiles.
If you do not find your exact scanner in the list, do not select a similar profile. Instead, select a
universal Twain profile. Different Twain profiles are available:
Select <Twain><OTHER MODELS> when you are using a regular, flatbed scanner.
Select <Twain><OTHER MODELS>(User interface) if you want to use your scanner user
interface to scan documents.
Select <Twain><OTHER MODELS with duplex feeder> when you are using a duplex scanner,
which scans both the front and backside of a page.
Configure
Click Configure to select your scanner driver. Selecting the correct scanner driver is required for
Readiris to be able to communicate with the scanner.
If you do not see your scanner listed in the Select Source window, then your scanner driver has not
been installed properly. Re-install your scanner driver before trying to configure it in Readiris. The
scanner driver can usually be found on the website of your scanner manufacturer.
Note: you can also configure the scanner driver directly on the main toolbar. Just click the down
arrow beneath Scan and click Select Source.
34