Operation Manual

Loading settings

• Click the Readiris button.

• Then click Load Settings and select the settings file you saved.

Restoring factory settings

• Click the Readiris button.

• Then click Restore Factory Settings.

Using the Wizard

The Wizard guides you step by step through the configuration process. Once you've gone through

the steps, click Go to start the automatic Readiris process.

To start the Wizard:

• Click the Readiris button, then click Wizard.

Steps of the Wizard

Step 1: Select the image source.

You can use your scanner to scan documents, or open image files you already have on your

computer.

During this first step you can also apply rotation options.

Select Page Deskewing if your documents are scanned crooked and you want to straighten

them.

Figure Step 1

Step 2: Select your scanner

(Note: if you selected image files in the previous step, proceed to Step 3).

If you already configured your scanner, your scanner model is displayed here. If it is not, the

Scanner Model list is displayed. Select your exact same Scanner Model, then click Configure

to configure the driver.

For more information on how to configure the scanner, see Configuring your scanner

. For

more information about the scanner settings, see the topic Selecting the Scanner Settings.