Operation Manual

Configuration
• Click the down arrow beneath Scan in the ribbon.
• Then click Settings.
• When you do this for the first time, the Scanner Model list appears automatically.
In this list you select your scanner profile. The scanner profile allows you to access features
specific to your scanner. For example, duplex scanning.
Do not worry if you don't see your scanner in the list; not all scanners have specific scanner
profiles.
Important note: in case you don't find the exact same profile, do not select a profile that
resembles it. Instead, select a universal Twain profile. Different Twain profiles are available:
Select <Twain><OTHER MODELS> when you are using a regular, flatbed scanner.
Select <Twain><OTHER MODELS>(User interface) if you want to use your scanner user
interface to scan documents.
Select <Twain><OTHER MODELS with duplex feeder> when you are using a duplex
scanner, which scans both the front and backside of a page.
Once you've selected a scanner model, you must configure you scanner driver.
• Click Configure to select your scanner driver.
If you do not see your scanner listed in the Select Source window, then your scanner driver
has not been installed properly. Re-install your scanner driver before trying to configure it in
Readiris. The scanner driver can usually be found on the website of your scanner
manufacturer.
Note: you can also configure the scanner driver directly on the main toolbar. Just click the down
arrow beneath Scan and click Select Source.
Once the scanner has been configured you can start scanning, using the default scanner settings. For
more information about the different scanner settings and how to change them, see the topic
Selecting the Scanner Settings
.
17