Operation Manual

Changing the user interface language
Readiris opens in the installation language by default. If you want to change the interface language:
• Click the Readiris button in the top left corner, then click User Interface Language.
• In the Language window that opens, select the language of your choice, then click OK.
Note: If you selected an incorrect language by mistake, click Ctrl+U inside Readiris. The Language
dialog box opens and you can select another language from the list.
Configuring your scanner
In order to scan documents in Readiris, your scanner must be configured correctly.
Before you configure the scanner in Readiris:
1. Make sure your scanner is connected to your computer, and switched on.
Note: the scanner should be physically connected to your computer with a USB cable. An
ethernet or wireless connection may also be used if the Twain driver supplied by the
manufacturer has been engineered with that capability.
2. Make sure you have the latest available Twain driver installed for your scanner.
In general, drivers can be found on the website of your scanner manufacturer. They are not
provided by I.R.I.S. Note that some scanner drivers may not work under the latest versions of
Windows. See the documentation supplied with your scanner to find out which platforms are
supported. If necessary, contact your scanner manufacturer.
16